Binance download

List of the catalog of this article:

• 1,Binance download How to clean the car engine if it's dirty
• 2,How to clean the car engine
• 3. How to clean the car engine

How to clean the car engine if it's dirty

Spray cleaning agent Spray the cleaning agent on the engine parts that need to be cleaned, and don't forget to remove the decorative cover. In places with thick oil stains, spray the detergent and brush it with a brush, which can quickly disperse the oil stains.

Spray cleaner. Spray the cleaning agent on the parts and decorative covers of the engine. If you are particularly dirty, you need to spray more detergent with a brush. Cleansing detergent. After the detergent begins to dissolve, wipe the detergent with a towel with good water absorption, or wash it with a high-pressure water gun. Use a lightener.

(1) Sprinkle engine cleaner on all parts, especially in dirty places that need more spray points. ( 2) When the engine cleaner begins to dissolve, turn on the high-pressure water spray gun and spray the engine and its dirt. ( 3) Spray the air outlet under the front windshield with a high-pressure gun.

If it is on the engine line or on the rubber tube, it will corrode these parts, causing the line and rubber to age faster, so it is better to clean it. Clean the engineIt's best to go to a professional store to clean the cabin, because they have special cleaning agents, and the cleaning effect is better. Where you can wash and where you can't, they are all professional.

The correct way to clean the engine: tools that need to be prepared: detergent, brush (or discarded toothbrush), towel and sprayer.

First of all, you can wipe the dirt in the engine room with a wet cloth. If this can clean the engine room, then don't wash it with water. If the wet cloth can't clean the dirt, you might as well try ordinary detergent to wipe it. If you have tried both of the above methods and still can't wipe off the dirt, choose to clean with water.

How to clean the car engine

1. Spray cleaner. HoldThe detergent is sprayed on the parts and decorative covers of the engine. If it is particularly dirty, you need to spray a little more detergent with a brush. Cleansing detergent. After the detergent begins to dissolve, wipe the detergent with a towel with good water absorption, or wash it with a high-pressure water gun. Use a lightener.

2. Spray the cleaning agent. Spray the cleaning agent on the engine parts that need to be cleaned, and don't forget to remove the decorative cover. In places with thick oil stains, spray the detergent and brush it with a brush, which can quickly disperse the oil stains.

3. You can choose to use a wet towel to clean the engine compartment, and this method can also effectively avoid the splashes from damaging the relevant circuit, so it is really good to clean it with a wet towel little by little.

4. PreventionWater preparation: Open the engine cover, cover the generator, distributor, brake oil bottle, etc. with a cloth or seal it with a plastic bag. Key points: one point should be covered or sealed. Especially generators and distributors. Quality standard: cover tightly or seal well.

5. Add cleaning oil, idle for 5-10 hours, and then add new oil. Using the method of detergent, add the detergent to the old engine oil of the original car in proportion to the instructions, and release it after idling for 5-10 minutes. Vehicles with particularly dirty engines need to disassemble the oil cover and oil sall for cleaning, which is generally operated by maintenance professionals.

How to clean the car engine

Spray cleaning agent Spray the cleaning agent on the engine parts that need to be cleaned, and don't forget to remove the decorative cover.In places with thick oil stains, spray the detergent and brush it with a brush, which can quickly disperse the oil stains.

Spray cleaner. Spray the cleaning agent on the parts and decorative covers of the engine. If you are particularly dirty, you need to spray more detergent with a brush. Cleansing detergent. After the detergent begins to dissolve, wipe the detergent with a towel with good water absorption, or wash it with a high-pressure water gun. Use a lightener.

Use the cleaning agent to pour the engine cleaner into the fuel tank. After 5-10 minutes of idling (if the engine has not been cleaned for a long time, the cleaning time can be appropriately extended), empty the old oil with detergent added to the engine, replace the oil filter, and add new oil.