OKX Wallet

List of the catalogue of this article:

• 1, What engine does Mazda 32020 use
• 2, How about the new Mazda 2.3 engine?
• 3、What car is the Mazda L3 engine used in
• 4、 Excuse me, what is the engine power of the old Mazda Six Coupe 2.3?

What engine does the Mazda 32020 model use?

1. Mazda Sanunxera is a four-cylinder engine. Take the 2020 Mazda Sanunxera as an example, it is a compact car, and the body size is 4662mm long and width 179. 7mm high 1445mm, wheelbase is 2726mm, and the fuel tank volume is 50l. The front suspension of the 2020 Mazda Sanunclave is a McPherson independent suspension, and the rear suspension is a torsion beam type.

2. The CA4GC18T engine belongs to Mazda's engine. The new Mazda 3 still uses the 15L engine and 20L engine on the model. The maximum horsepower is the same as the current model, which is 116 horsepower and 158 horsepower respectively. Although the power data has not changed, it can meet the latest In terms of national six emission power, the new Atz continues to be equipped with 2.

3. Mazda 3 Enclavera engine Mazda 3 Enclavera is equipped with two engines, one of which is a 5L naturally aspirated engine with a maximum power of 117 horsepower and a peak torque of 148Nm. This engine uses in-cylinder direct injection technology, with a maximum power speed of 6,000 to 6100 rpm and a maximum torque speed of 3,500 rpm.

4. The new Mazda 3 uses a 5L naturally aspirated engine and a 0L naturally aspirated engine. The new Mazda 3 is a compact car launched by Mazda Motors. The official guide price of this car is 1.29-1.89 million yuan.

5. There is also a 0L naturally aspirated engine with a maximum power of 158 horsepower with a peak torque of 2020Nm. This styleThe engine also uses in-cylinder direct injection technology, with a maximum power speed of 6,400 rpm and a maximum torque speed of 4,000 rpm.

6. The Mazda 3 engine is imported. Configuration: In general, the engine of the 6 is relatively mediocre, and the power and fuel consumption are average. Walking in the city is enough, but not for drag racing.

How about the new Mazda 2.3 engine?

It can also improve fuel economy and reduce exhaust emissions; the most important point is that the use of VVT technology greatly reduces the noise of the engine.

Good. According to the inquiry of Autohome.com, it is learned that the stability is improved: the Mazda 3 engine uses 8 balance blocks, which improves stability after precision installation. Improve fuel economy: The engine performs well in terms of performance and fuel economy, improving fuel economy.

Good. Mazda's 3-liter four-cylinder engine uses continuous timing valve control technology and variable valve time technology VVT. The application of these two technologies can greatly improve the power of the engine, output more torque and greater power.

The Mazda 63 engine is good.Displayed according to the relevant public information of the query. From the two aspects of appearance and space. Sports and fashion, the appearance of this car has been used for 10 years and is still young today: the V-shaped front face is simple and sharp, the waistline is excessively smooth, and the tail is round and full. It is also very dynamic without adding tail wings or enclosures.

What cars are Mazda L3 engines used in

Cars with Mazda engines are: Mazda CX-Mazda 3 Enclavera, Mazda Atz, Mazda CX-7, etc. The components of the engine include: gas distribution mechanism, crank connecting rod mechanism, ignition system, cooling system, lubrication system, supply system, etc.

Ma Liu 3, L3 engine, power 120 kilowatts, 163Horsepower, the maximum power speed is 6500 rm, the maximum torque speed is 4000 rm, the maximum torque output is 204 N: Mazda 6 will be equipped with two engines: 0-liter and 3-liter in-line four-cylinder engines.

Ma6 is a product of FAW Volkswagen. It uses the L3 engine of Japan Mazda with average performance. The Ma6 is well known for its beautiful appearance. Do you know the domestic FAW Pentium B50 and B70? It is the same engine as the Ma6. In the original words of the FAW manufacturer, it is to change the shell and the brand.

Binrui's top version is equipped with a GPS navigation system Internet of Vehicles Bluetooth car phone, which ensures the comfort of daily driving. In terms of power, Binrui's top version is equipped with a 10T 133 horsepower L3 engine, which can meet the power needs of daily driving. As a compact car that has attracted much attention The car, Binrui relies on its high cost performance.

Excuse me, what is the engine power of the old Mazda Six Coupe 2.3?

Mafda 6 has two power matching models. The engine with a displacement of 3L has a maximum power of 120 kilowatts and a maximum torque of 204 Nm, which explodes at 4,000 rpm. It is a high-speed engine with obvious movement characteristics.

The Mazda 6 is a 20L naturally aspirated engine. According to the relevant information, the 12-year Mazda 6 adopts a 20L naturally aspirated engine. The engine model is LF. The maximum power of the engine is 1080kW and the maximum horsepower is 147PS.

MaZda 6 is an S-V with dual overhead camshafts.T+VIS (similar to Toyota's vvt) 0 engine, the engine principle of 0 and 3 is exactly the same, but 0 is 108 kilowatts, while 3 is 122 kilowatts (only 14 kilowatts larger will not have any outstanding performance, and the 3 has been discontinued long ago).

Mazuda 6 has two types of displacement: 20L and 23L displacement. Mazda 6 will be equipped with two in-line four-cylinder engines of 20-liter and 23-liter engines. Its 23-liter four-cylinder engine will use continuous timing valve control technology SVT and variable valve time technology VVT. The application of these two technologies can Greatly improve the power of the engine.